INITIATION – 0.10 g Lead azide. Booster [Primer] (1 oz Dry Guncotton) required to detonate wet guncotton
SENSITIVITY – Very sensitive to impact, friction, heat, and spark when dry, detonates when struck with a 7.62mnm (30 cal.) rifle bullet
STABILITY – Relatively unstable in pure form, Stable when stored wet (8 to 30% Water) at room temperature
DETONATION VELOCITY – 5,532 m/s (18,150 fps) Wet, 7,343 m/s (24,090 fps) Dry
RE FACTOR (BRISANCE) [TNT=1.0] – 0.92 (wet), 1.18 (dry)
TOXICITY – Contact is irritating to the skin and eyes, toxic long-term effects after exposure
IGNITION POINT – 195o to 200o C.(383o to 392o F.) Ignites, 230o C.(446o F.) Explodes
SOLUBILITY – Insoluble in water, slightly soluble in alcohol, soluble in acetone, ether-alcohol
APPLICATIONS – PRINCIPLE USES – Demolition charges, component of propellants
Guncotton, commonly called Nitrocellulose, is made from the nitration of purified cotton fibers with Nitric and Sulfuric acids. Nitrocellulose generally has a lower percentage of Nitrogen in the molecule and is used as a basis for smokeless propellants. Guncotton is considered a high explosive and has a 13.4 % or greater Nitrogen content. The basic material has been used for everything from bandages, photographic plates, movie film, magician’s flash paper, and even artificial flowers. Guncotton is safest when used in the wet condition. The standard British Guncotton demolition charge is a slab of 87% Guncotton and 13% Water – 0.54 kg (19 oz) Guncotton to 0.09 kg (3 oz) water. Care is taken in storage and handling that the metal container holding 14 slabs does not get damaged and the contents dry out. If wetted with 30% moisture, Guncotton cannot be made to detonate. Normally wet guncotton can be handled easily and detonated with a cap and primer charge. Dry Guncotton is extremely dangerous to handle.